the goal in your mind.... |
Festive merriment quickly dissolves into tears and frustration as you jiggle the strand (like that helps), scour the line for burnt out bulbs, and eventually, storm off to the store for some replacement strands of lights as your cocoa grows cold.
One light goes out, they all go out... |
Hubby stumbled across something and brought it home. I wasn't even sure what to make of it at first but I'm here to tell you, this could save your Christmas sanity. Behold, I give you the best little gizzmo that actually lives up to it's promises... the Lightkeeper Pro.
God bless you light keeper pro. |
It sounds too good to be true, doesn't it? This thing that looks like a cross between a squirt gun, a taser, and a label maker is somehow going to fix your Christmas? I can say now from experience a resounding YES. By the way, I'm not on commission with the company or anything, I was just so shocked that it worked I had to blog about it. This little thing is a wonderment to behold. Talk about your multi-taskers, this baby has it all. A bulb and fuse tester, an audible voltage detector, a bulb puller (to save your fingers), a light socket connector, a magical "quick fix trigger" and to top it all off, it comes WITH batteries. For $20 bucks that's quite a deal. It will seriously pay for itself when it saves you from buying new strands every year.
How does it work?
Well that is the question of the century. My hubby, who is equal parts techie-nerd and geek, who happens to know a bit about currents, circuits, and electricity, was mystified by this thing at first. We had a strand on a pre-lit tree where half the bulbs were out. They did not look burned out, but they were not lit. We pulled one bulb out, tested it on the light keeper pro, then hubby put the tip of the gun in the empty socket, pulled the trigger, and bam, the whole strand lit up. WHAT? That's right. Lit up. That's why I called it the "magical quick fix trigger" earlier.
The light keeper pro in action |
You can test burnt out bulbs with it, replace just those and you are back in business. You can also test the entire strand for current and discover where loose bulbs or burnt out bulbs may be. My daughters had a mini pre-lit tree in their room they have been using as a night light all year, but it ended up burning out last week. One pull of the trigger and it was up and working again in minutes. Now if you have a strand that is old, damaged, or all the bulbs are burned out in a section, this might not work for you. Nor will it work on LED lights (though I just read they have new tool just for those) but for typical and frustrating strand outages this thing works amazingly well. Anyway, just had to pass this along to you guys. I have a link at the top of my blog in "my favorite things" tab if you want to order one on Amazon. How great will this be, when halfway through the Christmas season and your tree is already fully decorated but THEN a section goes out? No need to disassemble the whole area, just a few clicks from the Light Keeper Pro and it's Happy Fa la la la lalidays once again. Now go put on some Bing Crosby and lets get back to decorating. Hello Christmas sanity, I have missed you!
3 comments:
Oh my goodness ... another Christmas Miracle!!! How come we didn't know about this BEFORE we purchased new lights!!!
Hmmm... does it work on LED lights?
They have a new model that does led lights, i saw a link on their site...
Post a Comment